Start with your exact Gitzo model
Before you order neoprene tripod leg wraps for a Gitzo 2 Series tripod, check the model name printed on the tripod or its leg. The C37.1 wraps are listed against specific model numbers, so the dropdown is the first fit checkpoint. If your tripod is not in the list, do not assume a nearby model will fit. The supplied product information says the maker may still have measurements or can make wraps to your dimensions, so ask before ordering.
This is a made-to-order product. The listing asks you to allow 7-10 days for dispatch, which matters if you are preparing for a trip. Ordering early is part of getting the fit right.
What the C37.1 wraps are designed to cover
- C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series: Set of 3 (4mm) neoprene tripod leg wraps for the top/main section of the tripod leg. The set covers three legs and is intended for the upper section, so check that this is the part of your Gitzo 2 Series tripod you want to protect or insulate.

C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series - C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series: Reversible with Velcro seam. The reversible design gives you two colour options in one set and uses a Velcro seam for fitting.
- C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series: Ideal for protecting the tripod and insulation in cold conditions. These are the two main reasons to choose neoprene leg wraps over bare tripod legs.
Rule out cross supports before you order
The supplied information states that the leg wraps are not suitable for tripods with cross supports. Check your tripod's leg assembly for cross braces or similar supports before buying. If your Gitzo 2 Series tripod has them, these wraps are not the right choice, regardless of model number.
This is a hard compatibility limit, not a minor caveat. Cross supports change how the legs sit and move, so the wraps cannot be fitted as intended.
Model and colour options in the listing
- G 2227: Available in Realtree Max (rev.olive) or Black (rev.black).
- GH 2780 TQR: Available in Realtree Max (rev.olive) or Black (rev.black).
- GK 2380 VQR: Available in Realtree Max (rev.olive) or Black (rev.black).
- GK 2520 FT: Available in Realtree Max (rev.olive) or Black (rev.black).
- GT 2530: Available in Realtree Max (rev.olive) or Black (rev.black).
- GT 2530 LVL: Available in Realtree Max (rev.olive) or Black (rev.black).
If your model is not listed
The listing says that if you do not see your model, the maker may still have measurements or can make the wraps to your dimensions. That is the correct route for an unlisted Gitzo 2 Series tripod. Do not select a different model hoping it will stretch or fold into place.
Because the wraps are made to order, a measurement enquiry is also a good moment to confirm the lead time. The supplied information gives 7-10 days for dispatch, but it does not describe a measuring procedure, so ask what dimensions are needed rather than guessing.
C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series
- C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series: Available in Realtree Max (rev.olive) or Plain Black (rev.black). Colour is a real choice at checkout, and the reversible design means both faces are usable.
- C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series: Made to order, with 7-10 days allowed for dispatch. Plan around the lead time rather than expecting an off-the-shelf dispatch.
- C37.1 Neoprene Tripod Legs Wraps for Gitzo 2 Series: Not suitable for tripods with cross supports. This is the main compatibility exclusion to check before ordering.


