Put the cover on in the right order
The C90 is a pull-on cover, so the sequence matters more than the technique. The supplied instructions are simple: put the bag on the flash before adding the cover. That bag is the click seal bag the cover arrives in, and it gives the flash head extra weather protection when you use it as a liner.
Start with the flash head, slide the click seal bag over it, then pull the C90 cover over the whole assembly. The elastic fit grips around the flash head and the draw cord at the base lets you close the opening underneath. Because the cover is long enough to cover the flash, wireless trigger and mount, you can dress the whole stack in one go rather than protecting each piece separately.
What the C90 is built to cover
- C90 Camera flash cover: Long enough to cover flash, wireless trigger and mount This is the main fit question: you can cover the trigger and mount along with the flash rather than stopping at the flash head.

C90 Camera flash cover - C90 Camera flash cover: Elastic fit around flash head with draw cord at base The elastic holds the cover on the head while the draw cord closes the base, which is the part that keeps the cover from riding up.
- C90 Camera flash cover: One size, covers all major brands There is no size chart to work through, so the fit decision is about what you want to cover, not which size to order.
Fitting the cover around a trigger and mount
The cover is designed to work with wireless triggers, so you do not need to leave the trigger exposed. Work from the top down.
- Line the flash head first: Slide the click seal bag over the flash head before the cover goes on. This is the extra weather protection step described in the product information.
- Pull the cover over the head: Stretch the elastic opening over the flash head and ease the cover down. The elastic fit is what holds it in place around the head.
- Draw the base closed: Pull the draw cord at the base to close the opening around the trigger and mount. A snug base is what keeps the cover sitting where you put it.
- Check the standby light is hidden: The cover is long enough to conceal standby lights. If a light still shows, the cover is not pulled down far enough.
Where the cover earns its place outdoors
The C90 is made from waterproof material, which is the baseline for a camera flash rain cover. It suits all-weather outdoor photography and camera trap setups where kit is left out. The same design also helps conceal the kit: the cover hides the flash and trigger and covers standby lights that would otherwise give away a set.
That combination is why the cover is useful beyond rain. If you are waiting on badgers or setting up for tawny owls, a dark or patterned cover does two jobs at once: it keeps the weather off the electronics and makes the flash less obvious.
Choosing a colour for concealment or visibility
The C90 comes in six colours, and the choice depends on where the flash will sit rather than on the cover itself.
- All Terrain Pattern and DPM Camouflage: Patterned options for setups where you want the flash and trigger to break up against natural surroundings.
- Olive and Dark Olive: Plain, low-contrast colours for woodland and field edges where a solid dark shape is less noticeable than a bright one.
- White: A light option when you want the cover to match a pale background rather than disappear into dark foliage.
- Black: A neutral dark choice that also keeps the cover looking tidy in mixed setups.
C90 Camera flash cover at a glance
- C90 Camera flash cover: Made from waterproof material This is the core protection claim for outdoor use; the cover is intended to keep weather off the flash and trigger.
- C90 Camera flash cover: Has the added bonus of concealing standby lights Useful for camera traps and nocturnal setups where a visible standby light could disturb the subject.
- C90 Camera flash cover: Choice of camouflage patterns or plain colours: ATP All Terrain Pattern, DPM Camouflage, Olive Green, Dark Olive green, White or Black Colour is the only option to decide, so pick it against the background where the flash will be mounted.
What to check before you rely on it
The supplied information does not give a care routine, a recommended operating temperature, or a confirmed level of water resistance beyond the waterproof material claim. Treat the cover as weather protection for the flash and trigger, not as a guarantee that kit can be left out indefinitely.
Before a session, fit the cover with your own flash, trigger and mount attached and check that the draw cord closes the base around your particular setup. The one-size design covers all major brands, but the shape of your mount and trigger is what determines how neatly the base closes.
If you use the click seal bag as a liner, keep it with the cover so the two parts stay together. That bag is the extra layer the product information describes, and it is easy to lose if it is stored separately.


