The difference is the support, not the pattern
C38 and C38.1 share the same camouflage idea and the same 1.5m length, but they are not interchangeable. C38 is a set of three sleeves for a tripod without cross supports. C38.1 is a single sleeve for a monopod. If you own both a tripod and a monopod, the practical answer is usually one of each, not two of either.
The pattern choice is a separate decision from the type choice. Both products come in Realtree Edge or All Terrain Pattern, and the C38 set also lists a lightweight Hardwood Green option. Pick the type first, then the colour.
C38 set vs C38.1 single sleeve
- What you get: C38 is a set of three leg sleeves. C38.1 is one sleeve for a monopod.
- What it fits: C38 is for tripods without cross supports. C38.1 is for a monopod. Check your support before ordering, because a tripod with cross supports is outside the C38 description.
- Length: Both are listed at 1.5m. That is the supplied length; do not assume it covers every leg section on every tripod or monopod.
- Patterns: C38: Hardwood Green, Realtree Edge or All Terrain Pattern. C38.1: Realtree Edge or All Terrain Pattern.
- Best for: C38 for camouflaging a tripod from top to bottom. C38.1 for a monopod that needs a matching cover.
C38 Tripod Leg Sleeves & C38.1 Monopod Leg Sleeve
- C38 Tripod Leg Sleeves & C38.1 Monopod Leg Sleeve: Set of three leg sleeves for tripods without cross supports. This is the key compatibility point: if your tripod has cross supports, the C38 set is not described as fitting it.

C38 Tripod Leg Sleeves & C38.1 Monopod Leg Sleeve - C38 Tripod Leg Sleeves & C38.1 Monopod Leg Sleeve: Length 1.5m. The only supplied size figure, so use it to judge coverage rather than guessing a fit.
- C38 Tripod Leg Sleeves & C38.1 Monopod Leg Sleeve: C38.1 is a single leg sleeve for a monopod, available in Realtree Edge or All Terrain Pattern. Confirms the monopod sleeve is sold singly and has two pattern options, not three.
Which one matches your kit?
If you are covering a tripod, count the legs and check for cross supports. A standard tripod without cross supports is the case the C38 three-sleeve set is described for. If your tripod has cross supports, the supplied information does not describe a C38 fit, so treat that as a reason to check before buying rather than assuming it will work.
If you are covering a monopod, C38.1 is the direct match. Buying the C38 set for a monopod would leave you with two unused sleeves, and buying C38.1 for a tripod would cover only one leg.
Check before you order
- Count your supports: One tripod needs the three-sleeve C38 set; one monopod needs the single C38.1.
- Look for cross supports: C38 is described for tripods without cross supports. If yours has them, the supplied information does not confirm a fit.
- Measure the leg you want to cover: The listed length is 1.5m. Compare that with the section you intend to cover, especially on compact travel tripods.
- Choose the pattern last: Realtree Edge and All Terrain Pattern appear on both; Hardwood Green is listed for the C38 set only.
What the listing does not settle
The supplied information gives length and pattern options but not a diameter range, so you cannot confirm from it alone that a sleeve will grip a particularly wide or narrow leg. It also does not give fitting steps or care instructions. If those details matter for your setup, ask before ordering rather than relying on assumptions.
Price is listed at USD 16.49 against a comparison price of USD 24.98, but that is catalog information, not a promise about current store pricing. Treat it as a starting point and confirm at checkout.


